ABCO Peerless Sprinkler Corporation - Fire Protection System Design, Installation, Testing, Inspection and Maintenance ABCO Peerless Sprinkler Corporation
How effective are fire sprinklers?

Sprinklers operate automatically in the area of fire origin, preventing a fire from growing undetected to a dangerous size, while simultaneously sounding an alarm.

Automatic fire sprinklers keep fires small. The majority of fires in sprinklered buildings are handled by one or two sprinklers.

How do fire sprinklers operate?

Automatic fire sprinklers are individually heat-activated, and tied into a network of piping with water under pressure. When the heat of a fire raises the sprinkler temperature to its operating point (usually 165ºF), a solder link will melt or a liquid-filled glass bulb will shatter to open that single sprinkler, releasing water directly over the source of the heat.

When a fire starts, do all sprinklers discharge at once?

Contrary to what is sometimes shown on television sitcoms, all sprinklers in the building do not operate simultaneously. Sprinklers distribute water directly where it is needed to confine and control a fire. In the majority of fires, only one or two sprinklers are required to operate.

Can sprinklers discharge accidentally?

The likelihood of a sprinkler discharging water in the absence of a fire is very small. Each model of sprinkler is subjected to rigorous laboratory tests to guarantee long-term integrity, and every single sprinkler is hydrostatically tested at twice the maximum system water pressure prior to leaving the factory.

Loss records of Factory Mutual Research indicate that the probability of a standard response spray sprinkler discharging accidentally due to a manufacturing defect is only 1 in 16,000,000 sprinklers per year in service.

How reliable are fire sprinklers?

All fire protection features have a reliability factor. Walls and shafts can be breached by means of poke-throughs and building alterations. Exit doors can be blocked or locked.

Sprinklers may be the most reliable fire protection system known. Detailed fire records for Australia and New Zealand (where fire must be reported) for the years 1886 through 1968 showed that 99.76% of all fires were extinguished or controlled by the sprinklers. Fire records in this country are less dependable due to lack of full reporting, especially for small fires where the sprinklers are successful. Nevertheless, the range includes a 96.2% success record reported by the National Fire Protection Association for the years 1925 through 1969, 98.4% success record for New York City high-rise buildings between 1969 and 1978, and a 98.2% success record for U.S. Department of Energy facilities between 1952 and 1980.

How much water damage is caused by sprinklers?

Because sprinklers attack the fire while it is still small, the total amount of water needed for fire suppression is small, often less than 50 gallons per minute. If the fire is permitted to grow, the fire department will typically apply hundreds of gallons of water per minute during their operations. For this reason, total amounts of water used in sprinklered buildings approximate one-tenth the amounts used in fires in non-sprinklered buildings.

What is the life safety record for fully sprinklered buildings?

Aside from fire fighting and explosion fatalities, there has never been a multiple loss of life in a fully sprinklered building due to fire or smoke. Individual lives have been lost when the victim or his clothing or immediate surroundings became the source of the fire.

A National Fire Protection Association study for the years 1971-1975 found that approximately 20 lives are lost each year in this country in sprinklered buildings, as compared to approximately 4,000 per year in unsprinklered buildings. Some 68% of the lives lost in sprinklered buildings were due to explosions, and an additional 18% were due to the fact that the fire originated in an unsprinklered area of the building.

What is a "listed" sprinkler?

All sprinklers installed in conformance with National Fire Protection Association (NFPA) standards must be listed. A listing basically means that the manufacturer has successfully submitted the product to an independent laboratory for testing against an established standard of quality. Both Underwriters Laboratories and Factory Mutual Research have established special listing categories for fire sprinklers.

What is a residential sprinkler?

The residential sprinkler was the first sprinkler to incorporate the new fast response technology. It was developed in the late 1970s in conjunction with federally funded research into a low-cost residential sprinkler system. Research showed that in order to make relatively small domestic water supplies effective for sprinkler protection, and to control a residential fire before small rooms could fill up with toxic smoke, a sprinkler needed to be considerably more sensitive to heat than the standard sprinklers. The needed residential sprinklers were developed by sprinkler manufacturers while appropriate product testing criteria were being developed by Underwriters Laboratories and appropriate installation rules were being developed by the NFPA Committee on Automatic Sprinklers. The result is that there are now listed residential sprinklers which can be installed in conformance with NFPA 13D and, in some cases, NFPA 13. The listed residential sprinklers are tested not only for fast response, but also for special distribution and cooling abilities.

What is a quick response sprinkler?

Quick response sprinklers are those which are tested under the same product testing criteria as standard sprinklers, but also exhibit the fast response characteristics of listed residential sprinklers. Some manufacturers developed these sprinklers by inserting the residential sprinkler operating mechanism into a standard sprinkler frame. Other manufacturers successfully submitted residential sprinklers to the laboratory for testing under the criteria for standard sprinklers. In both cases, Underwriters Laboratories designated these special sprinklers as quick response sprinklers. By establishing a separate listing category, UL has identified listed quick response sprinklers as being different from both standard and residential sprinklers. Unlike the residential sprinklers, quick response sprinklers are not required to have special cooling and distribution abilities.

What are "trade-offs" between fire protection system costs and savings?

The system cost can often be offset by insurance savings, and by specific design alternatives or "trade-offs" permitted by most building codes in view of the superior protection afforded by sprinklers. These trade-offs often include reduced fire-resistant requirements for structural components, longer exit travel distances, and larger building areas and heights.

How often should my system be inspected?

The National Fire Protection Association publishes NFPA 25 Inspection, Testing and Maintenance of Water-Based Fire Protection Systems. This document recommends that control valves without electronic supervision be checked on a weekly basis, just to make sure that they are in the open position. Other system components have different requirements. Check with the NFPA 25 or the manufacturers' literature for details.

At least four times each year, a full sprinkler system inspection should be performed by a knowledgeable professional. Some states and cities require more frequent inspections. Most sprinkler contractors offer economical long-term service agreements. These contractors can provide you with the test certificates which will comply with your insurance company and local fire department inspection requirements. To learn more about inspection, please visit the Modern Sprinkler website...

How does inspection affect my insurance rate?

Buildings which are completely sprinklered enjoy special reduced rates. However, if the insurance company does not receive verification of system inspection, penalties in the form of higher insurance rates apply.

The Insurance Services Office (ISO) publishes a Commercial Fire Rating Schedule (CFRS). Section 402 of the CFRS requires building owners to have annual inspections of sprinkler systems to enjoy the "sprinklered" insurance rate.

If an inspection is overdue for up to 12 months, a 5% penalty applies. If the inspection is overdue for 12-24 months a 20% penalty applies. If an inspection is 24-36 months overdue, a 60% penalty applies. If after 36 months an inspection is still not performed, a fully sprinklered building is rated as "Unsprinklered" for the purpose of insurance, with no credit allowed.

Check with your insurance carrier about the rate for your building. Even though it is fully sprinklered you may not be getting as big a discount you're entitled to. Get your sprinkler system inspected and take full financial advantage of your fire sprinkler system. To learn more about inspection, please visit the Modern Sprinkler website...

How does inspection affect my liability?

Recent court decisions have held building owners and managers liable because they did not have a fire sprinkler system in a building which had a fire. Even though sprinkler systems were not required in these buildings by fire or building codes, owners still had to pay out millions of dollars. Similarly, an owner or manager of a building with a fire sprinkler system would be held liable if he failed to maintain that system in a working condition.

In addition, owners and managers of commercial and business facilities have an obligation to maintain safe conditions for employees and occupants. By working in a sprinklered building, employees come to expect a certain level of protection. It is incumbent on the owner to maintain this level of protection. To learn more about inspection, please visit the Modern Sprinkler website...

Source: National Fire Sprinkler Association
For more FAQs on fire sprinklers and their applications, visit the National Fire Sprinkler Association website.

Copyright 2005   ABCO Peerless Sprinkler Corporation   Telephone: 516.294.6850